Recondition your acrylics - This is often overlooked because people think their acrylics don't need it. Once you see the lamps all work perfectly fine, then replace the acrylic. (Use eyewear when doing this) If you twisted the lamp to much, or there is a problem with the lamp, this will allow you to quickly deal with the problem at hand without having to do all the extra work of removing the acrylic again. Once you have installed your new lamps, and BEFORE you re-install the acrylics, test the new lamps by turning the bed on. It is helpful to have two people when doing this.ĭon't re-install your acrylics yet. Once removed, lift the acrylic slightly and roll out the front. Handle with care, as they can become somewhat brittle with age. A small flat blade screw driver is often handy. Instead, remove the colored plastic strips on the both long sides of each acrylic. SunQuest / SunVision acrylic removal - Do not take the ends off your tanning bed to remove these acrylics (common mistake). This will insure we get you the right lamps the first time, and can show you the maximum options for your tanning bed. THEN call us at 1-80 or shop online using one of our guides, the Lamp Wizard, or other online help we have created just for home tanning bed owners. Get a pen and paper before you shop - Write down your beds model name/number (ie: SunMaster 24KCT, SunQuest Pro 16SE, etc.) at the very least, and getting the names and numbers written on the lamps can also be handy, particularly for older beds. There is no way to cover every situation, but our goal is to help keep you from making mistakes when replacing the lamps in your home tanning bed. These are basic tips to make changing your lamps easier. Tips for home tanning bed lamp replacement.

Sunquest pro 16se tanning bed parts